1
SAFETY RELATED SYMBOLS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol, wherever used, alerts
you to the presence of un-insulated
and dangerous voltages within the
product enclosure. These are voltages
that may be sufficient to constitute the
risk of electric shock or death.
WARNING
Describes precautions that should be
observed to prevent the possibility of
death or injury to the user.
Describes precautions that should be
observed to prevent damage to the
product.
CAUTION
Operating Conditions
Always install in accordance with the
manufacturer’s instructions.
This symbol, wherever used, alerts
you to important operating and ma-
intenance instructions. Please read.
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
ON:
OFF:
Denotes the product is turned on.
Denotes the product is turned off.
1
WARNING
Power Supply
Ensure that the mains source voltage (AC
outlet) matches the voltage rating of the
product. Failure to do so could result in
damage to the product and possibly the user.
External Connection
Do not Remove any Covers
Fuse
To prevent fire and damage to the
product, use only the recommended
fuse type as indicated in this manual.
Do not short-circuit the fuse holder.
Before replacing the fuse, make sure
that the product is OFF and disconnected
from the AC outlet.
Always use proper ready-made insulated
mains cabling (power cord). Failure to do
so could result in shock/death or fire. If
in doubt, seek advice, from a registered
electrician.
Within the product are areas where high
voltages may present. To reduce the risk
of electric shock do not remove any
covers unless the AC mains power cord
is removed.
Covers should be removed by qualified
service personnel only.
No user serviceable parts inside.
Unplug the product before electrical storms
occur and when unused for long periods of
time to reduce the risk of electric shock or
fire.
Protective Ground
Before turning the product ON, make sure
that it is connected to Ground. This is to
prevent the risk of electric shock.
Never cut internal or external Ground wires.
Likewise, never remove Ground wiring
from the Protective Ground Terminal.
Disposing of this product should
not be placed in municipal waste
and should be separate collection.
(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
User’s Manual
www.altoproaudio.com
Version 1.0 March 2006
LTO
R
English
MS1
SPEAKER MODELLER
Страница:
(1 из 10)
навигация
Оглавление инструкции
- Страница 1 из 11
User’s Manual MS1 SPEAKER MODELLER R LTO www.altoproaudio.com Version 1.0 March 2006 English - Страница 2 из 11
Unplug the product before electrical storms occur and when unused for long periods of time to reduce the risk of electric shock or fire. SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN External Connection This symbol, wherever used, alerts you to the presence of un-insulated and - Страница 3 из 11
To avoid the risk of electric shock and damage, do not subject this product to any liquid/rain or moisture. Do not use this product when in close proximity to water. Servicing Refer all servicing to qualified service personnel only. Do not perform any servicing other than those instructions - Страница 4 из 11
Preface Dear Customer, Thanks for choosing LTO MS1 Processor and thanks for choosing one of the results of LTO AUDIO TEAM job and researches. For our LTO AUDIO TEAM, music and sound are more than a job…are first of all passion and let us say…our obsession! We have been designing professional - Страница 5 из 11
TABLE OF CONTENT 1. INTRODUCTION ………………………………………………………………………………..5 2. FEATURES ……………………………………………………………………………………….5 3. CONTROL ELEMENTS - Страница 6 из 11
1. INTRODUCTION Thank you very much for expressing your confidence in LTO products by purchasing LTO MS1. The MS1 is a professional processor, which provides you an excellent electric performance. The MS1 is 2-Channel analog sound processor with 16 effects, and all input and output connectors are - Страница 7 из 11
4. Power LED This LED lights up when the unit is powered on. 3.2 Rear Panel: INPUT OUTPUT TIP/PIN 2 RING/PIN 3 SLEEVE/PIN 1 15VAC~ LEFT RIGHT POWER (5) TIP/PIN 2 RING/PIN 3 SLEEVE/PIN 1 (6) RIGHT LEFT(MONO) (7) 5. AC Inlet This jack is used to connect the AC power supply with the supplied 15V AC - Страница 8 из 11
5. TECHNICAL SPECIFICATION AUDIO INPUT AUDIO OUTPUT Connectors 1/4″ jack Type RF filtered, servo balanced input Impedance 30 Kohm balanced, 22 Kohm unbalanced Max. input level +26 dBu balanced and Unbalanced CMRR Typ.40db,>55db@1khz Connectors Type 1/4″ jack Balanced Min. output impedance 100 Ohm - Страница 9 из 11
2.2 Please provide a copy of your sales receipt or other proof of purchase with the returned machine, and give detail information about your return address and contact telephone number. 2.3 A brief description of the defect will be appreciated. 2.4 Please prepay all the costs involved in the return - Страница 10 из 11
SEIKAKU TECHNICAL GROUP LIMITED No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any - Страница 11 из 11
Перед вами файл pdf, где представлена инструкция (руководство) на русском для ALTO MS1. Вы можете скачать ее либо изучить в онлайн режиме.
Подробные сведения об инструкции:
Устройство из раздела: процессор эффектов
Бренд-производитель: ALTO
Наименование модели: ALTO MS1
Инструкция на английском языке
Файл: pdf
Размер файла: 193,50 kB
Скачать инструкцию к HARPER HDT2-1110
ЗАГРУЗИТЬ
Просмотр инструкции онлайн
Наличие в магазинах
Интернет-магазин —
отсутствует
Санкт-Петербург —
отсутствует
Москва —
отсутствует
Доставка на дом и в ПВЗОт 4-х недель
Самовывоз из магазинов От 4-х недель
Alto MS1 — это профессиональный пассивный двухканальный процессор. Включает в себя 16 эффектов. На передней панели расположены два LED индикатора. Clip — загорается, когда входной сигнал слишком сильный, он предупреждает, что на выходе сигнал может вызвать искажение. Второй индикатор — power on — загорается, когда устройство включено. Также на передней панели находится регулятор громкости Gain — он регулирует входное усиление от -20дБ до +20дБ.
На задней панели расположен разъем для подключения источника питания переменного тока, а также два балансных 1/4″ TRS-разъема.
Особенности MS1:
- Два канала;
- 16 пресетов;
- LED индикаторы clip и power on на передней панели.
- Alto
- Звук Alto
- Процессоры эффектов Alto
Файлы для скачивания
- Инструкция для Alto MS1 (англ.) (PDF 193.509 Кб)
Технические характеристики Alto MS1:
- Тип: процессор эффектов;
- 16 пресетов: JAZZ CLUB+SUB, VIRTUAL SUB, STAGE MONTOR, JAZZ CLUB, CONCERT HALL+SUB, DISCO, VOCAL, ROCK & ROLL, FLAT, DRUM KICK, ANTIRUMBLE, CONCERT HALL, ARENA+ SUB, LOUDNESS, ROCK & ROLL+SUB, ACOUSTIC;
- Вход: 1/4″ TRS-разъем;
- Входной импеданс: 30 кОм (balanced) / 22 кОм (unbalanced);
- Макс. входной уровень: +26 дБн (balanced and unbalanced);
- Выход: 1/4″ TRS-разъем;
- Макс. выходной импеданс: 100 Ом;
- Макс. выходной уровень: +26 дБн (unbalanced);
- Частотная характеристика: 10Гц ~ 30кГц, +/-1дБ(FLAT);
- Соотношение сигнал/шум: >110дБ, невзвеш., 22 Гц ~ 22кГц;
- Адаптер питания: 230В~, 50Гц;
- Потребляемая мощность: 5 Вт (блок питания в комплекте);
- Размер: 130 х 117 х 45 мм;
- Вес: 0.8 кг.
1. INTRODUCTION
5
16 effects preset.
hannels
and output
.
and
n.
.
2 C
input
connectors are compatible with balanced JACK
Front panel LED indicators for clip
power o
Accurate level control
2. FEATURES
3. CONTROL ELEMENTS
3.1 Front Panel:
Thank you very much for expressing your confidence in
LTO products by purchasing
LTO MS1. The MS1 is a professional processor, which provides you an excellent
electric performance. The MS1 is 2-Channel analog sound processor with 16 effects,
and all input and output connectors are compatible with balanced jack. Thanks to the
use of selected and expensive components, the performance of MS1 is worth much
more than its price.
M S 1
LTO
R
VIRTUAL SUB
STAGE MONITOR
JAZZ CLUB
CONCERT HALL+SUB
DISCO
VOCAL
ROCK & ROLL
JAZZ CLUB+SUB
DRUM KICK
ARENA+SUB
LOUDNESS
ROCK & ROLL+SUB
ACOUSTIC
ANTIRUMBLE
CONCERT HALL
CLIP
MIN
MAX
POWER
SPEAKER MODELLER
0dB
GAIN
FLAT
(1)
(2)
(3)
(4)
1. Gain Control
This control adjusts the input gain by a range of -20 dB to +20dB.
2. Clip LED
This LED lights up when the input signal is too strong. It warns that the output
Please attenuate the level of the input signal.
signal may cause distortion.
3. Presets Selector
Via this knob, you can select the right effect you wish to perform. There are
CLUB+SUB, WIRTUAL SUB, STAGE MO-
total 16 options for you, JAZZ
ROCK & ROLL,
NTOR, JAZZ CLUB, CONCERT HALL+SUB, DISCO, VOCAL,
FLAT, DRUM KICK, ANTIRUMBLE, COBCERT, CONCERT HALL, ARENA+
SUB, LOUDNESS, ROCK & ROLL+SUB, ACOUSTIC and JAZZ CLUB+SUB.