Archer c60 tp link инструкция

Максим aka WisH

Высшее образование по специальности «Информационные системы». Опыт работы системным администратором — 5 лет.

• Page 1: User Guide

  Archer C60 User Guide AC1350 Wireless Dual Band Router REV1.0.0 1910011738…

• Page 2: Table Of Contents

  Contents About This Guide ………………..1 Chapter 1. Get to Know About Your Router ……2 1. 1. Product Overview .

• Page 3
  9. 1. Share Local Resources on the Internet by Virtual Servers ….39 9. 2. Open Ports Dynamically by Port Triggering……. . . 40 9.

• Page 4: About This Guide

  • The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the router. • Specifications can be found on the product page at http://www.tp-link.com. • A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com.

• Page 5: Chapter 1. Get To Know About Your Router

  Chapter Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. This chapter contains the following sections: • Product Overview • Panel Layout…

• Page 6: Product Overview

  Ethernet ports supply high-speed connection to your wired devices. Moreover, it is simple and convenient to set up and use the TP-LINK router due to its intuitive web interface and the powerful Tether app.

• Page 7: The Back Panel

  Chapter 1 Get to Know About Your Router LED Explanation Name Status Indication The 2.4GHz wireless band is working properly. (2.4GHz Wireless) The 2.4 GHz wireless band is disabled. The 5GHz wireless band is working properly. ( 5GHz Wireless) The 5GHz wireless band is disabled. At least one Ethernet port is connected.

• Page 8
  Chapter 1 Get to Know About Your Router Item Description Power On/Off Button Press this button to power on or off the router. Press this button for about 2 seconds to turn on or off the wireless function of your router.

• Page 9: Chapter 2. Connect The Hardware

  Chapter Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router…

• Page 10: Position Your Router

  Chapter 2 2. 1. Position Your Router • The Product should not be located where it will be exposed to moisture or excessive heat. • Place the router in a location where it can be connected to the various devices as well as to a power source.

• Page 11
  Chapter 2 Smart Device 4 ) Turn on the router. 5 ) Verify that the hardware connection is correct by checking these LEDs. Power 2.4GHz 5GHz Internet Tips: If 2.4GHz LED and 5GHz LED are off, press the WPS/Wi-Fi On/Off button for about 2 seconds, and then check the LEDs again in a few seconds.
• Page 12
  Chapter 2 Close to 1. Tab the WPS icon on the device’s screen. 2. Immediately press the WPS button on your router. Close to…

• Page 13: Chapter 3. Log Into Your Router

  Chapter Log into Your Router…

• Page 14
  Chapter 3 Log into Your Router With a Web-based utility, it is easy to configure and manage the rouer. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log into your router.

• Page 15: Chapter 4. Set Up Internet Connection

  Chapter Set Up Internet Connection This chapter introduces how to connect your router to the Internet. The router is equipped with a web-based Quick Setup wizard. It has necessary ISP information built in, automates many of the steps and verifies that those steps have been successfully completed.

• Page 16: Use Quick Setup Wizard

  Chapter 4 Set Up Internet Connection 4. 1. Use Quick Setup Wizard The Quick Setup Wizard will guide you through the process to set up your router. Tips: If you need the IPv6 Internet connection, please refer to the section of Set Up an IPv6 Internet Connection.

• Page 17
  Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username password provided by your ISP. PPPoE users usually have DSL cable modem.
• Page 18
  Chapter 4 Set Up Internet Connection 4 ) If you choose L2TP, enter the username password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password, and choose the Secondary Connection…

• Page 19: Network Map

  Chapter 4 Set Up Internet Connection 5. Click Save. To check your Internet connection, click Network Map on the left of the page. Note: It may take 1-2 minutes to make the settings valid. 6. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example.

• Page 20: Set Up An Ipv6 Internet Connection

  Chapter 4 Set Up Internet Connection 4. 3. Set Up an IPv6 Internet Connection Your ISP provides information about one of the following IPv6 Internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

• Page 21
  Chapter 4 Set Up Internet Connection Dynamic IP(SLAAC/DHCPv6): Click Advanced to do more configuration if your ISP requires. Click Save and then click Renew to finish the configuration. PPPoE: Fill in the Username and Password. Click Advanced to do more configuration if your ISP requires.
• Page 22
  Chapter 4 Set Up Internet Connection Pass-Through (Bridge): Click Save and skip to step 6. 4. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. Tips: Find Help…
• Page 23
  Chapter 4 Set Up Internet Connection Tips: Visit the if there is no Internet connection.

• Page 24: Chapter 5. Guest Network

  Chapter Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network security and privacy.

• Page 25: Create A Network For Guests

  Chapter 5 Guest Network 5. 1. Create a Network for Guests 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Guest Network. Locate the Wireless section. 3. Create a guest network according to your needs. 1 ) Enable 2.4GHz Wireless network or…

• Page 26: Customize Guest Network Options

  Chapter 5 Guest Network 5. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Guest Network. Locate the Settings section. 3. Customize guest network options according to your needs. •…

• Page 27: Chapter 6. Parental Controls

  Chapter Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and controls access to specified websites at specified time.

• Page 28
  For example, I want to allow my children’s devices (e.g. a computer or a tablet) to access only www.tp-link.com Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) at the weekend and not other times. How can I 1.
• Page 29
  Chapter 6 Parental Controls 5. Enter a Description for the entry. Keep the Enable This Entry checkbox selected. Click OK. 6. Select Whitelist as the restriction policy. Tips: 1. With Blacklist selected, the controlled devices cannot access any websites containing the specified keywords during the Internet Access Time period. 2.
• Page 30
  Chapter 6 Parental Controls Done! Now you can control your children’s Internet access according to your needs.

• Page 31: Chapter 7. Qos

  Chapter This chapter introduces how to create a QoS (Quality of Service) rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load. This chapter contains the following sections: • Prioritize Internet Traffic with QoS…

• Page 32: Prioritize Internet Traffic With Qos

  Chapter 7 7. 1. Prioritize Internet Traffic with QoS QoS (Quality of Service) is designed to ensure the efficient operation of the network when come across network overload or congestion. I want to: Specify priority levels for some devices or applications. For example, I have several devices that are connected to my wireless network.

• Page 33
  Chapter 7 2 ) Select By Application and select in the list. Then click Tips: If your application isn’t listed on the screen, click Custom Application to add application manually. • Name: Enter a name for your applicaiton. • Protocol: Select the protocol for your application, if your are not sure, select ALL.
• Page 34
  Chapter 7 • Port: Enter the destination port for your application, usually each application has a fixed port, please ensure you enter the correct the port. In this case, the destination port for ftp is 21. 3. Add a middle priority QoS rule for the phone. 1 ) Select By Device and then click…
• Page 35
  Chapter 7 5. The QoS rules list will display in the table. Tips: If you want to delete a QoS rule, click to remove the responding rule from the list. Done! Now QoS is implemented to Prioritize Internet Traffic.

• Page 36: Chapter 8. Network Security

  Chapter Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network against DoS (Denial of Service) attacks from flooding your network with server requests using DoS Protection, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP &…

• Page 37: Protect The Network From Cyber Attacks

  Chapter 8 Network Security 8. 1. Protect the Network from Cyber Attacks The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol.

• Page 38: Access Control

  Chapter 8 Network Security 5. If you want to ignore the ping packets from the WAN port, select Ignore Ping Packet From WAN Port; if you want to ignore the ping packets form the LAN port, select Ignore Ping Packet From LAN Port.

• Page 39
  Chapter 8 Network Security 3 ) Click Block above the Online Devices table. The selected devices will be added to Devices in Blacklist automatically. To allow specific device(s) 1 ) Select Whitelist and click Save. 2 ) Click in the Devices in Whitelist section.

• Page 40: Ip & Mac Binding

  Chapter 8 Network Security 8. 3. IP & MAC Binding IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but unrecognized MAC address.

• Page 41: Chapter 9. Nat Forwarding

  Internet to initiatively communicate with the devices in the local network, thus to realize some special functions. TP-LINK router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and DMZ.

• Page 42: Share Local Resources On The Internet By Virtual Servers

  Chapter 9 NAT Forwarding 9. 1. Share Local Resources on the Internet by Virtual Servers When you build up a server in the local network and want to share it on the Internet, Virtual Servers can realize the service and provide it to the Internet users. At the same time Virtual Servers can keep the local network safe as other services are still invisible from the Internet.

• Page 43: Open Ports Dynamically By Port Triggering

  Chapter 9 NAT Forwarding Tips: 1. It is recommended to keep the default settings of Internal Port Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually.

• Page 44: Make Applications Free From Port Restriction By Dmz

  Chapter 9 NAT Forwarding 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click Add. 3. Click View Existing Applications, and select the desired application. The External Port, Internal Port Protocol…

• Page 45: Make Xbox Online Games Run Smoothly By Upnp

  Chapter 9 NAT Forwarding Note: When DMZ is enabled, the DMZ host is totally exposed to the Internet, which may bring some potential safety hazard. If DMZ is not in use, please disable it in time. I want to: Make the home PC join the Internet online game without port restriction.

• Page 46
  Chapter 9 NAT Forwarding Tips: 1. UPnP is enabled by default in this router. 2. Only the application supporting UPnP protocol can use this feature. 3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components).

• Page 47: Chapter 10. Vpn Server

  Chapter VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through Internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. OpenVPN is somewhat complex but with greater security and more stable.

• Page 48: Use Openvpn To Access Your Home Network

  Chapter 10 VPN Server 10. 1. Use OpenVPN to Access Your Home Network In the OpenVPN connection, the home network can act as a server, and the remote client can access the server through the router which acts as an OpenVPN Server gateway.

• Page 49: Use Pptp Vpn To Access Your Home Network

  Chapter 10 VPN Server 7. Click Save. 8. Click Generate to generate a new certificate. Note: If you have already generated one, please skip this step, or click Generate to update the certificate. 9. Click Export to save the OpenVPN configuration file. Remote client will use this configuration file to access your router.

• Page 50
  Chapter 10 VPN Server Note: Before you enable Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router’s WAN port and synchronize your System Time with Internet. 3. In the Client IP Address filed, enter the range of IP addresses (up to 10 clients) that can be leased to the client by the PPTP VPN server.
• Page 51
  Chapter 10 VPN Server 2 ) Enter the Username Password to authenticate clients to the PPTP VPN Server. 3 ) Click OK. Step 2. Configure PPTP VPN Connection on Your Remote Client Remote client can use Windows built-in PPTP software or third-party PPTP software to connect to PPTP Server.
• Page 52
  Chapter 10 VPN Server 3. Select Connect to a workplace and click Next. 4. Select Use my Internet connection (VPN).
• Page 53
  Chapter 10 VPN Server 5. Enter the WAN IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 6. Enter the User name and Password, it’s the username and password you have set on your router, and click Connect.
• Page 54
  Chapter 10 VPN Server 7. The PPTP VPN connection is created and ready to use.

• Page 55: Chapter 11. Customize Your Network Settings

  Chapter Customize Your Network Settings This chapter guides you on how to configure advanced network features. This chapter contains the following sections: • Change the LAN Settings • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account •…

• Page 56: Change The Lan Settings

  Chapter 11 Customize Your Network Settings 11. 1. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on.

• Page 57
  Chapter 11 Customize Your Network Settings 2 ) Click Save. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the router’s Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 ) Tick Enable…

• Page 58: Specify Dhcp Server Settings

  Chapter 11 Customize Your Network Settings 11. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices.

• Page 59: Set Up A Dynamic Dns Service Account

  Chapter 11 Customize Your Network Settings 2. Click View Exsiting Devices or enter the MAC address of the client device. 3. Enter the IP address to reserve for the client device. 4. Enter the Description for this entry. 5. Tick the Enable This Entry checkbox and click OK.

• Page 60: Create Static Routes

  Chapter 11 Customize Your Network Settings 4. Enter the username, password and domain name of the account (such as lisadns.ddns.net). 5. Click Login and Save. Tips: If you want to use a new DDNS account, please logout first, and then login with the new account. 11.

• Page 61
  Chapter 11 Customize Your Network Settings How can 1. Change the router’s LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2’s DHCP I do that? function. 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

• Page 62: Specify Wireless Settings

  Chapter 11 Customize Your Network Settings Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port, so should be selected. Description: Enter a description for this static routing entry. 5.

• Page 63
  Chapter 11 Customize Your Network Settings ¾ To hide SSID: 1. Go to Basic > Wireless. 2. Select Hide SSID, and your SSID won’t display when you scan for local wireless networks on your wireless device and you need to manually join the network. ¾…

• Page 64: Use Wps For Wireless Connection

  Chapter 11 Customize Your Network Settings 11. 7. Use WPS for Wireless Connection Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

• Page 65: Chapter 12. Manage The Router

  Chapter Manage the Router This chapter will show you the configuration for managing and maintaining your router. This chapter includes the following sections: • Set Up System Time • Test the Network Connectivity • Upgrade the Firmware • Backup and Restore Configuration Settings •…

• Page 66: Set Up System Time

  Chapter 12 Manage the Router 12. 1. Set Up System Time System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way you prefer to obtain the system time. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

• Page 67: Test The Network Connectivity

  Chapter 12 Manage the Router 2. Set the current Date MM/DD/YYYY format). 3. Set the current Time HH/MM/SS format). 4. Click Save. ¾ To set up Daylight Saving Time: 1. Select Enable Daylight Saving Time. 2. Select the correct Start date and time when daylight saving time starts at your local time zone.

• Page 68: Upgrade The Firmware

  TP-LINK aims at providing better network experience for users. We will inform you throught the web management page if there’s any update firmware available for your router. Also, the latest firmware will be released at TP-LINK official website, you can download it from the…

• Page 69: Online Upgrade

  You will see the Firmware Upgrade page. 12. 3. 2. Local Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 3. Go to Advanced >…

• Page 70: Restore Interrupted Upgrade After Power Failure

  1. Make sure you have the latest firmware file in your computer. If not, try another way to connect your computer to the Internet and download the latest firmware file from www.tp-link.com. 2. Connect your computer to the router with an Ethernet cable.

• Page 71
  Chapter 12 Manage the Router 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > System Tools > Backup & Restore. ¾ To backup configuration settings: Click Backup to save a copy of the current settings to your local computer. A ‘ . bin’ file of the current settings will be stored to your computer.

• Page 72: Change The Administrator Account

  Chapter 12 Manage the Router 12. 5. Change the Administrator Account The account management feature allows you to change your login username and password of the web management page. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

• Page 73: Local Management

  Chapter 12 Manage the Router • Generally, Enable Authentication should be selected if the login of the mailbox requires username and password. 5. Click Save. You can click Test Email to test whether the configuration is successful. To recover the default login username and password, please refer to FAQ.

• Page 74: Remote Management

  Chapter 12 Manage the Router 3 ) Click View Existing Devices and select the device to manage the router from the Existing Devices list, or enter the MAC address of the device manually. 4 ) Specify a Description for this entry. 5 ) Tick the Enable This Entry checkbox.

• Page 75: System Log

  Chapter 12 Manage the Router • Forbid all devices to manage the router remotely: Select Disable Remote Management and click Save. • Allow all devices to manage the router remotely: 1 ) Select Enable Remote Management for All Devices. 2 ) Enter Web Management Port (1024-65535 or 80).

• Page 76
  Chapter 12 Manage the Router ¾ To Send the System Log to a Mailbox at a Fixed Time: For example, I want to check my router’s working status at a fixed time every day, however, it’s too troublesome to log in to the web interface every time I want to go checking.

• Page 77: Monitor The Internet Traffic Statistics

  Chapter 12 Manage the Router From: Enter the email address used for sending the system log. Enter the recipient’s email address, which can be the same as or different from the sender’s email address. SMTP Server: Enter the SMTP server address. Tips: SMTP server is available for users in most webmail systems.

• Page 78: Control Leds

  Chapter 12 Manage the Router 3. Toggle on Traffic Statistics, and then you can monitor the traffic statistics in Traffic Statistics List section. Click Refresh to update the statistic information on the page. Click Reset All to reset all statistic values in the list to zero. Click Delete All to delete all statistic information in the list.

• Page 79
  Chapter 12 Manage the Router ¾ To turn off LEDs during Night Mode Period: 1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2 ) Go to Advanced > System Tools > System Parameters.

• Page 80: Faq

  Q1. What can I do if I forgot my wireless password? The default wireless password is printed on the label of the router. If the password has been altered, please connect your computer to the router using a cable and follow the steps below: 1.

• Page 81
  • Make sure the IP address of your computer is configured as Obtain an IP address automatically Obtain DNS server address automatically. • Make sure you enter the correct IP address to login: http://tplinkwifi.net. • Check your computer’s settings: 1 ) Go to Start >…
• Page 82
  5 ) Go to Advanced > Restore advanced settings, click to save the settings. • Use another web browser or computer to login again. • Reset the router to factory default settings and try again. If login still fails, please contact the technical support.
• Page 83
  Q4. How to use the WDS Bridging function to extend my wireless network? example, my house covers a large area. The wireless coverage of the router I’m using (the root router) is limited. I want to use an extended router to extend the wireless network of the root router.
• Page 84
  4. Disable DHCP: 1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. Q5.
• Page 85
  • Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute. 2 ) Power on your modem first, wait about 2 minutes until it gets a solid cable or Internet light.
• Page 86
  • Modify the LAN IP address of the router. Note: Most TP-LINK routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may conflict with the IP range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem and cause you can’t access the Internet.
• Page 87
  • Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute. 2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light.
• Page 88
  1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless. 2 ) Exit the wireless configuration tool (the TP-LINK Utility, for example).
• Page 89
  3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the right side. 5 ) Right click Wireless Zero Configuration, and then select Properties.
• Page 90
  2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router.
• Page 91
  Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

• Page 92: Rf Exposure Information

  CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

• Page 93
  Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:…

• Page 94: Safety Information

  Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. •…