Asus pro ws x570 ace инструкция

Owner’s Manual for ASUS models including: Motherboards Pro WS X570-ACE

Pro WS X570-ACE

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Pro WS X570-ACE — ASUS

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, …

• PDF Viewer
• Universal Document Viewer
• Google Docs View
• Google Drive View
• Download Document [pdf]
• Download Document [Optimized]
• Document:
  • Text

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 40 Pages, 3.81MB

DocumentE15611 Pro WS X570-ACE UM V2 WEB

Motherboard

Pro WS X570-ACE

E15611 Revised Edition V2 June 2019
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License ("GPL"), under the Lesser General Public License Version ("LGPL") and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from https://www.asus.com/support/ or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc. Legal Compliance Dept. 15 Li Te Rd., Beitou, Taipei 112 Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code. This offer is valid to anyone in receipt of this information. ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii

Contents

Safety information...................................................................................................... iv About this guide......................................................................................................... iv Package contents....................................................................................................... vi ASUS Pro WS X570-ACE specifications summary ................................................. vi

Chapter 1:

Product Introduction

1.1 Before you proceed ................................................................................... 1-1

1.2 Motherboard overview............................................................................... 1-1

1.3 Central Processing Unit (CPU) ............................................................... 1-11

1.4 System memory ....................................................................................... 1-12

Chapter 2:

BIOS Information

2.1 Managing and updating your BIOS .......................................................... 2-1

2.2 BIOS setup program .................................................................................. 2-4

2.3 Exit menu.................................................................................................... 2-9

Appendix Notices .................................................................................................................... A-1

iii

Safety information
Electrical safety
· To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
· When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
· Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
· Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
· Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
· If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
· Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
· Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
· To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
· Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
· Place the product on a stable surface. · If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts: · Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard. · Chapter 2: BIOS Information This chapter discusses changing system settings through the BIOS Setup menus.
iv

Where to find more information
Refer to the following sources for additional information and for product and software updates. 1. ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Italics

Indicates a menu or an item to select. Used to emphasize a word or a phrase.

<Key>

Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).

v

Package contents
Check your motherboard package for the following items.

Motherboard Cables
Accessories
Application DVD Documentation

1 x ASUS Pro WS X570-ACE Motherboard 4 x Serial ATA 6.0Gb/s Cables 1 x ASUS Q-Shield 1 x M.2 Screw Package 1 x VGA Holder (fan is purchased separately) 1 x ACC Activation Key Card 1 x Support DVD 1 x User manual

If any of the above items is damaged or missing, contact your retailer.

ASUS Pro WS X570-ACE specifications summary

CPU Chipset
Memory
Expansion slots

AMD AM4 Socket for 3rd and 2nd Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors* * Refer to www.asus.com for the AMD CPU support list. AMD X570 Chipset 3rd Gen AMD RyzenTM Processors 4 x DIMM, max. 128GB, DDR4 4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) /
3866(O.C.) / 3733(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz, unbuffered memory 2nd Gen AMD RyzenTM Processors 4 x DIMM, max. 128GB, DDR4 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz, unbuffered memory 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors 4 x DIMM, max. 128GB, DDR4 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz, unbuffered memory Dual channel memory architecture * Refer to www.asus.com for the Memory QVL (Qualified Vendors List). 3rd Gen AMD RyzenTM Processors - 2 x PCI Express 4.0 x16 slots (single at x16 or dual at x8/x8 mode) 2nd Gen AMD RyzenTM Processors - 2 x PCI Express 3.0 x16 slots (single at x16 or dual at x8/x8 mode) 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors - 1 x PCI Express 3.0 x 16 slot (x8 mode) AMD X570 chipset - 1 x PCI Express 4.0 x 16 slots (max. at x8 mode) - 1 x PCI Express 4.0 x1 slot

(continued on the next page)

vi

ASUS Pro WS X570-ACE specifications summary

Graphics MultiGPU support
Storage
LAN
Audio

Integrated Graphics in the AMD RyzenTM with RadeonTM Vega Graphics Processors Multi-VGA output support: DisplayPort/HDMI ports Supports DisplayPort 1.2 with max. resolution 4096 x 2160@ 60Hz Supports HDMI 2.0b with max. resolution 4096 x 2160 @24Hz / 2560 x 1600 @ 60Hz 3rd and 2nd Gen AMD RyzenTM Processors Supports NVIDIA® 2Way SLITM Technology Supports AMD® 3Way CrossFireXTM Technology 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors Supports AMD® 2Way CrossFireXTM Technology 3rd Gen AMD RyzenTM Processors
- 1 x M.2_1 socket 3 with M Key, Type 2242/2260/2280/22110 (PCIE 4.0 x 4 and SATA modes) storage devices support
2nd Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors
- 1 x M.2_1 socket 3 with M Key, Type 2242/2260/2280/22110 (PCIE 3.0 x 4 and SATA modes) storage devices support
AMD X570 chipset  M.2_2 socket 3* with M Key, Type 2242/2260/2280
(PCIE 4.0 x 2) storage devices support
- 4 x Serial ATA 6.0 Gb/s connectors with RAID 0, RAID 1 and RAID 10 support
- 1 x U.2 connector (supports U.2 NVMe device) * The M.2_2 socket shares PCIe lanes with PCIeX1_1; when PCIeX1_1 is occupied, M.2_2
only can only run at PCIE 4.0 x 1.
Realtek® RTL8117
Intel® I211-AT Gigabit LAN Realtek® S1220A 8channel high definition audio CODEC featuring Crystal Sound 3 - Separate layer for left and right track, ensuring both sound deliver equal quality
- Impedance sense for front and rear headphone outputs
- Audio shielding ensures precise analog/digital separation and greatly reduced multilateral interference
 EMI protection cover to prevent electrical noise to affect the amplifier quality - Premium Japan-made audio capacitors provides warm, natural, and immersive
sound with exceptional clarity and fidelity - High quality 120dB SNR stereo playback output (Line-out@back) & 113dB SNR
input (Line-in) support  Supports up to 32Bit/192kHz playback* - Supports jack-detection, multi-streaming, front panel jack-retasking (MIC)
- Optical S/PDIF out port at back I/O * Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for 8-Channel audio.

(continued on the next page)

vii

ASUS Pro WS X570-ACE specifications summary

ASUS Exclusive Features

5-Way Optimization by Dual Intelligent Processors 5  5Way Optimization tuning key perfectly consolidates TPU, EPU, DIGI+ VRM,
Fan Expert 4, and Turbo App - DIGI+ VRM: Digital power design with Dr. MOS - Fan Xpert 4: Fan Auto Tuning function and multiple thermistors selection for
optimized system cooling control - TPU - EPU - Turbo App: system performance tuning, network priority, and audio scene
configuration for selected applications. Procool II Power connector design ASUS OptiMem UEFI BIOS - CrashFree BIOS 3 - EZ Flash 3  EZ Tuning Wizard ASUS Exclusive Features - ASUS NODE: hardware control interface - Turbo LAN - ASUS Ai Charger - ASUS AI Suite 3 - ASUS Server Management Application ASUS SafeSlot - Protect your graphics card Investment ASUS 5X Protection III - ASUS LANGuard: Protects against LAN surges, lightning strikes and static-
electricity discharges! - ASUS Overvoltage Protection: World-class circuit-protecting power design - ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater durability! - ASUS DRAM Overcurrent Protection: Enhanced DRAM overcurrent protection - ASUS ESD Guards - Enhanced ESD protection - DIGI+ VRM Q-Design - ASUS Q-Shield - ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) - ASUS Q-Slot - ASUS Q-DIMM Out-of-band Management - BIOS Update Indicator LED  LAN Initialization Indicator LED
(continued on the next page)

viii

ASUS Pro WS X570-ACE specifications summary

USB
ASUS Quiet Thermal Solution
Back Panel I/O Ports

3rd Gen AMD RyzenTM Processors - 3 x USB 3.2 Gen 1 ports (2 ports at back panel[blue], 1 port at mid-board) 2nd Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors - 3 x USB 3.2 Gen 1 ports (2 ports at back panel[blue], 1 port at mid-board) AMD X570 chipset: - 5 x USB 3.2 Gen 2 ports (5 ports at back panel, 4 type A+ 1 type C) - 3 x USB 3.2 Gen 1 ports (3 ports at mid-board) - 4 x USB 2.0 ports at mid-board Quiet Thermal Design: - ASUS Fan Xpert 4 - Chipset & MOS Heat-sink with heatpipe, M.2 Heat-sink, and built-in PCH fan solution 1 x DisplayPort 1 x HDMI port 1 x Intel LAN (RJ45) port 1 x Realtek LAN (RJ45) port 5 x USB 3.2 Gen 2 ports (teal blue, 4 x Type-A, 1 x Type-C) 2 x USB 3.2 Gen 1 ports (Type-A) 1 x Optical S/PDIF out 5 x Audio Jacks (Line in, Front Speaker Out, Mic in, Center/Subwoofer, Rear
Speaker Out)

(continued on the next page)

ix

ASUS Pro WS X570-ACE specifications summary

Internal I/O Connectors
BIOS Manageability Support DVD OS Support Form factor

2 x USB 3.2 Gen 1 connector supporting additional 4 USB ports 2 x USB 2.0 connectors support additional 4 USB ports 1 x M.2 Socket 3 for M Key, type 2242/2260/2280/22110 devices support, (both
SATA & PCIE mode) 1 x M.2 Socket 3 for M Key, type 2242/2260/2280 devices support, (PCIE mode) 4 x SATA 6.0Gb/s connectors (gray) 1 x 4-pin CPU fan connector 1 x 4-pin CPU_OPT fan connector 1 x 4-pin AIO_PUMP connector 3 x 4-pin Chassis Fan connectors 1 x Front panel audio connector (AAFP) 1 x COM connector 1 x 24-pin EATX Power connector 1 x 8-pin EATX 12V Power connector 1 x System Panel 1 x Node connector 1 x Clear CMOS header 1 x RTL8117 reset password header 1 x T_Sensor Header 1 x Debug Header 256 Mb Flash ROM, UEFI AMI BIOS, PnP, SMBIOS 3.2, ACPI 6.2, Multilanguage BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Last Modified log, F12 PrintScreen, F9 Search and ASUS DRAM SPD (Serial Presence Detect) memory information WOL by PME, PXE Drivers ASUS Utilities EZ Update Anti-virus software (OEM version) Windows® 10 64-bit RHEL 7.4 Ubuntu ATX Form Factor, 12"x 9.6" (30.5 cm x 24.4 cm)

Specifications are subject to change without notice.

x

Chapter 1: Product Introduction
Product Introduction

1

1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.

· Unplug the power cord from the wall socket before touching any component.
· Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
· Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

1.2 Motherboard overview

Place this side towards the rear
of the chassis

Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

ASUS Pro WS X570-ACE

1-1

1.2.1 Layout contents
Connectors/Jumpers/Slots 1. ATX power connectors (24pin EATXPWR, 8pin EATX12V) 2. AMD AM4 CPU socket 3. DDR4 DIMM slots 4. CPU, CPU optional, chassis, and AIO pump fan connectors (4pin CPU_FAN, 4pin
CPU_OPT, 4pin CHA_FAN1~3, 4pin AIO_PUMP FAN) 5. USB 3.2 Gen 1 connector (201 pin U32G1_12; U32G1_34) 6. SATA 6Gb/s connector (7pin SATA6G_14) 7. MiniSAS HD connector (U.2) 8. System panel connector (203 pin PANEL) 9. USB 2.0 connector (101 pin USB1112; USB1314) 10. Node connector (121 pin NODE) 11. Thermal Sensor connector (2pin T_SENSOR) 12. Clear RTC RAM (2pin CLRTC) 13. Clear LAN Password (3pin LAN_PWD) 14. Serial port connector (101 pin COM) 15. Front panel audio connector (101 pin AAFP) 16. PCI Express 4.0/3.0 x16 slots 17. PCI Express 3.0/2.0 x1 slots 18. M.2 sockets (M.2_1(SOCKET3); M.2_2 (SOCKET3))

Page 1-2 1-3 1-3
1-3
1-3 1-3 14 14 1-5 1-5 1-5 1-5 1-5 1-6 1-6 1-6 1-6 18

ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit.

EATX12V

GND GND GND GND
PIN 1

+12V DC +12V DC +12V DC +12V DC

EATXPWR

+3 Volts +12 Volts +12 Volts +5V Standby Power OK
GND +5 Volts
GND +5 Volts
GND +3 Volts +3 Volts
PIN 1

GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts

· The 8pin Power Plug LED lights up to indicate that the 8pin power plug is not connected.
· For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. This PSU type has 24pin and 8pin power plugs.
· We recommend that you use a PSU with higher power output when configuring a system with more powerconsuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.

1-2

Chapter 1: Product Introduction

AMD AM4 CPU socket The motherboard comes with an AM4 socket designed for AMD AM4 Socket for 3rd and 2nd Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors.

For more details, refer to 1.3 Central Processing Unit (CPU).
DDR4 DIMM slots Install 2 GB, 4 GB, 8 GB, 16 GB, and 32 GB unbuffered DDR4 DIMMs into these DIMM sockets.
For more details, refer to 1.4 System memory.

CPU, CPU optional, chassis, and AIO pump fan connectors (4-pin CPU_FAN, 4-pin CPU_ OPT, 4-pin CHA_FAN1~3, 4-pin AIO_PUMP FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.

CPU_OPT

CPU_FAN

CPU OPT PWM CPU OPT IN
CPU OPT PWR GND
CPU FAN PWM CPU FAN IN
CPU FAN PWR GND

AIO_PUMP FAN CHA_FAN1~3

AIO_PUMP PWM AIO_PUMP IN
AIO_PUMP PWR GND
CHA FAN PWM CHA FAN IN
CHA FAN PWR GND

USB 3.2 Gen 1 connector (20-1 pin U32G1_12; U32G1_34)
Connect a USB 3.2 Gen 1 module to any of these connectors for additional USB 3.2 Gen 1 front or rear panel ports. These connectors comply with USB 3.2 Gen 1 specifications and provides faster data transfer speeds of up to 5 Gbps, faster charging time for USB chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0

U32G1

USB3+5V IntA_P2_SSRXIntA_P2_SSRX+
GND IntA_P2_SSTXIntA_P2_SSTX+
GND IntA_P2_DIntA_P2_D+

PIN 1
USB3+5V IntA_P1_SSRXIntA_P1_SSRX+ GND IntA_P1_SSTXIntA_P1_SSTX+ GND IntA_P1_DIntA_P1_D+ GND

SATA 6Gb/s connector (7-pin SATA6G_1-4) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.

SATA6G
GND RSATA_TXP RSATA_TXN
GND RSATA_RXN RSATA_RXP
GND

ASUS Pro WS X570-ACE

1-3

Mini-SAS HD connector (U.2)

The MiniSAS HD connector allows you to connect a

U.2

MiniSAS HD cable to support configurations such as U.2

devices or four SATA devices.

System panel connector (20-3 pin PANEL) This connector supports several chassismounted functions.
· System power LED (4-pin PWR_LED)
This 4pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
· System power LED (2-pin or 3-1 pin PLED) The 2pin or 31 pin connector is for the system power LED.
· Hard disk drive activity LED (2-pin HDD_LED) This 2pin connector is for the HDD Activity LED.
· System warning speaker (4-pin SPEAKER) This 4pin connector is for the chassismounted system warning speaker.
· ATX power button/soft-off button (2-pin PWR_SW) This connector is for the system power button.
· Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
· Chassis intrusion connector (2-pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.

USB 2.0 connector (10-1 pin USB1112; USB1314)
Connect a USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connectors comply with USB 2.0 specifications and supports up to 480Mbps connection speed.

USB1314 USB1112

USB+5V USB_P13USB_P13+ GND NC USB+5V USB_P11USB_P11+ GND NC

PIN 1

PIN 1

USB+5V USB_P14USB_P14+
GND USB+5V USB_P12USB_P12+
GND

14

Chapter 1: Product Introduction

Node connector (12-1 pin NODE) The Node connector allows you to connect a compatible PSU or control a compatible fan extension card.

Visit www.asus.com for more information about the devices and the latest compatibility list.
Thermal Sensor connector (2-pin T_SENSOR) The Thermal Sensor connector allows you to connect a sensor to monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermal sensor and place it on the device or the motherboard's component to detect its temperature.

Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to reenter data.

+3V_BAT GND

CLRTC
PIN 1

If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

Clear LAN Password (3-pin LAN_PWD) This jumper allows you to clear the LAN password. To erase the LAN Password:
1. Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 12 (default) to
pins 23. Keep the cap on pins 23 for about 510 seconds, then move the cap back to pins 12. 3. Plug the power cord and turn ON the computer.

LAN_PWD
Clear Password

ASUS Pro WS X570-ACE

1-5

RXD DTR DSR CTS

Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

COM
PIN 1

DCD TXD GND RTS
RI

AGND NC SENSE1_RETUR SENSE2_RETUR

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel

audio I/O module that supports HD Audio standard.

Connect one end of the front panel audio I/O module

AAFP

cable to this connector.

PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L

HD-audio-compliant pin definition

PCI Express 3.0/2.0 x16 slots This motherboard supports three PCI Express 3.0/2.0 x16 graphic cards that comply with the PCI Express specifications. Actual PCI Express speeds varies per BIOS settings.
PCI Express 3.0/2.0 x1 slots This motherboard has two PCI Express 3.0/2.0 x1 slots that support PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.

PCIe operating mode 3rd Gen AMD RyzenTM Processors

Slot Description
PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode)

Single VGA /
PCIe card
x16 (PCIe 4.0) N/A N/A
x4 (PCIe 4.0) Support
x2 (PCIe 4.0) N/A

PCIe operating mode
Dual VGA /
PCIe card
x8 (PCIe 4.0) x8 (PCIe 4.0)
N/A x4 (PCIe 4.0)
Support x2 (PCIe 4.0)
N/A

Triple VGA /
PCIe card
x8 (PCIe 4.0) x8 (PCIe 4.0) x8 (PCIe 4.0) x4 (PCIe 4.0)
Support x2 (PCIe 4.0)
N/A

(continued on the next page)

1-6

Chapter 1: Product Introduction

2nd Gen AMD RyzenTM Processors

Slot Description
PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode)

Single VGA /
PCIe card
x16 (PCIe 3.0) N/A N/A
x4 (PCIe 3.0) Support
x2 (PCIe 4.0) N/A

PCIe operating mode
Dual VGA /
PCIe card
x8 (PCIe 3.0) x8 (PCIe 3.0)
N/A x4 (PCIe 3.0)
Support x2 (PCIe 4.0)
N/A

Triple VGA /
PCIe card
x8 (PCIe 3.0) x8 (PCIe 3.0) x8 (PCIe 4.0) x4 (PCIe 3.0)
Support x2 (PCIe 4.0)
N/A

2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics

Slot Description
PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode)

Single VGA /
PCIe card
x8 (PCIe 3.0) N/A N/A
x4 (PCIe 3.0) Support
x2 (PCIe 4.0) N/A

PCIe operating mode
Dual VGA /
PCIe card
x8 (PCIe 3.0) N/A
x8 (PCIe 4.0) x4 (PCIe 3.0)
Support x2 (PCIe 4.0)
N/A

Triple VGA /
PCIe card
N/A N/A N/A x4 (PCIe 3.0) Support x2 (PCIe 4.0) N/A

· We recommend that you provide sufficient power when running CrossFireXTM or SLI® mode.
· Ensure to connect the 8pin and 4pin power plugs when running CrossFireXTM or SLI® mode.
· Connect a chassis fan to the chassis fan connectors when using multiple graphics cards for better thermal environment.

ASUS Pro WS X570-ACE

17

M.2 sockets (M.2_1(SOCKET3); M.2_2 (SOCKET3)) These sockets allow you to install M.2 (NGFF) SSD modules.

M.2(SOCKET3)

· For 3rd Gen AMD RyzenTM Processors, the M.2_1 supports PCIe 4.0 x4 and SATA modes M key design and type 2242/2260/2280/22110 storage devices.
· For 2nd and 1st Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors, the M.2_1 supports PCIe 3.0 x4 and SATA modes M key design and type 2242/2260/2280/22110 storage devices.
· For AMD X570 chipset, the M.2_2 supports PCIe 4.0 x2 mode M key design and type 2242/2260/2280 storage devices.
· The M.2_2 socket shares PCIe lanes with PCIeX1_1; when PCIeX1_1 is occupied, M.2_2 only can only run at PCIE 4.0 x 1.
The M.2 SSD module is purchased separately.

18

Chapter 1: Product Introduction

1.2.2 Rear panel connectors

1. USB 3.2 Gen 2 Type-A ports. These 9pin Universal Serial Bus 3.2 (USB 3.2) ports are for USB 3.2 Gen 2 devices.

· USB 3.2 Gen 1/Gen 2 devices can only be used as data storage only. · We strongly recommend that you connect your devices to ports with matching data
transfer rate. Please connect your USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports and your USB 3.2 Gen 2 devices to USB 3.2 Gen 2 ports for faster and better performance for your devices.

2. USB 3.2 Gen 2 Type-CTM port. This 24pin Universal Serial Bus (USB) port is for USB (Type C) devices.
3. DisplayPort. This port allows you to connect your motherboard to an external display. 4. LAN (RJ-45) port. These ports allow Gigabit connection to a Local Area Network
(LAN) through a network hub. LAN port LED indications

Activity/Link LED

Status

Description

Off

No link

Orange

Linked

Orange (Blinking) Data activity

Orange (Blinking Ready to wake Wake up

then steady)

from S5 mode

Speed LED

Status Description

OFF

10Mbps connection

ORANGE 100Mbps connection GREEN 1Gbps connection

ACT/LINK SPEED LED LED LAN port

5. HDMI port. This port is for a HighDefinition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Bluray, and other protected content.

ASUS Pro WS X570-ACE

1-9

6. USB 3.2 Gen 1 Type-A port. These 9pin Universal Serial Bus (USB) ports are for USB 3.2 Gen 1 devices. · USB 3.2 Gen 1 devices can only be used for data storage. · We strongly recommend that you connect USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports for faster and better performance from your USB 3.2 Gen 1 devices.
7. USB 3.2 Gen 2 Type-A ports. These 9pin Universal Serial Bus 3.2 (USB 3.2) ports are for USB 3.2 Gen 2 devices.

· USB 3.2 Gen 1/Gen 2 devices can only be used as data storage only. · We strongly recommend that you connect your devices to ports with matching data
transfer rate. Please connect your USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports and your USB 3.2 Gen 2 devices to USB 3.2 Gen 2 ports for faster and better performance for your devices.

8. Optical S/PDIF OUT port. This port allows you to connect amplified speakers, headphones, or Sony/Phillips Digital Interconnect Format (S/PDIF) compliant devices.
9. Audio I/O ports. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 5.1, or 7.1channel configuration.

Audio 2, 4, 5.1, or 7.1-channel configuration

Port
Light Blue Lime Pink Orange Black

Headset 2-channel Line In Line Out Mic In
­
­

4-channel
Line In Front Speaker Out Mic In ­ Rear Speaker Out

5.1-channel
Line In Front Speaker Out Mic In Center/Sub woofer Rear Speaker Out

7.1-channel
Side Speaker Out Front Speaker Out Mic In Center/Sub woofer Rear Speaker Out

110

Chapter 1: Product Introduction

1.3 Central Processing Unit (CPU)
The motherboard comes with an AM4 socket designed for AMD AM4 Socket for 3rd and 2nd Gen AMD RyzenTM / 2nd and 1st Gen AMD RyzenTM with RadeonTM Vega Graphics Processors.
Unplug all power cables before installing the CPU. · The AM4 socket has a different pinout design. Ensure that you use a CPU designed
for the AM4 socket. · The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to
prevent bending the connectors on the CPU and damaging the CPU. · Ensure that all power cables are unplugged before installing the CPU.
Installing the CPU

Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.

ASUS Pro WS X570-ACE

1-11

1.4 System memory Overview
This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:

Channel Channel A Channel B

Sockets DIMM_A1 & DIMM_A2 DIMM_B1 & DIMM_B2

· Start installing the DIMMs in slots A2 and B2. · Always install DIMMs with the same CAS Latency. For an optimum compatibility, we
recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.
· The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendormarked value.
· For system stability, use a more efficient memory cooling system to support a full memory load or overclocking condition.
· Visit the ASUS website for the latest QVL.

1-12

Chapter 1: Product Introduction

Installing a DIMM 1

2
A

A B

To remove a DIMM

B

A

ASUS Pro WS X570-ACE

1-13

114

Chapter 1: Product Introduction

Chapter 2: BIOS Information
BIOS Information

2

2.1 Managing and updating your BIOS
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility.

2.1.1 EZ Update
EZ Update is a utility that allows you to automatically update your motherboard's softwares, drivers and the BIOS version easily. With this utility, you can also manually update the saved BIOS and select a boot logo when the system goes into POST.
To launch EZ Update, click EZ Update on the AI Suite 3 main menu bar.

Click to automatically update your
motherboard's driver, software and
firmware

Model Name: Pro WS X570-ACE version: 0302 Release Date: 05/22/2019

Click to find and select the BIOS
from file

Click to select a boot logo

Click to update the BIOS

EZ Update requires an Internet connection either through a network or an ISP (Internet Service Provider).

ASUS Pro WS X570-ACE

2-1

2.1.2 ASUS EZ Flash 3
The ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OSbased utility.
· Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 2.3 Exit Menu for details.
· Check your local Internet connection before updating through the Internet.

To update the BIOS using EZ Flash 3: 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash 3 and press <Enter> to enable it. 2. Follow the steps below to update the BIOS via USB or Internet.
Via USB a) Insert the USB flash disk that contains the latest BIOS file to the USB port, then
select by USB. b) Press <Tab> to switch to the Drive field. c) Press the Up/Down arrow keys to find the USB flash disk that contains the latest
BIOS, and then press <Enter>. d) Press <Tab> to switch to the Folder field. e) Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to
perform the BIOS update process. Via the Internet a) Select by Internet. b) Press the Left/Right arrow keys to select an Internet connection method, and then
press <Enter>. c) Follow the onscreen instructions to complete the update. 3. Reboot the system when the update process is done.

2-2

Chapter 2: BIOS Information

· ASUS EZ Flash 3 supports USB devices, such as a USB flash disk, with FAT 32/16 format and single partition only.
· DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
2.1.3 ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the updated BIOS file.
· Before using this utility, rename the BIOS file in the removable device into PROX570.CAP.
· The BIOS file in the support DVD may not be the latest version. Download the latest BIOS file from the ASUS website at www.asus.com.
Recovering the BIOS To recover the BIOS: 1. Turn on the system. 2. Insert the support DVD to the optical drive or the USB flash drive that contains the
BIOS file to the USB port. 3. The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 3 utility automatically. 4. The system requires you to enter BIOS Setup to recover BIOS settings. To ensure
system compatibility and stability, we recommend that you press <F5> to load default BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!

ASUS Pro WS X570-ACE

23

2.2 BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press <Delete> or <F2> during the PowerOn Self Test (POST). If you do not press <Delete> or <F2>, POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: Press <Ctrl>+<Alt>+<Del> simultaneously. Press the reset button on the system chassis. Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend you always shut down the system properly from the operating system.
· The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.
· Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard.
· Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
· If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5. See section 2.3 Exit Menu for details.
· If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.2 Motherboard overview for information on how to erase the RTC RAM.
BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. Press <F7> to change between the two modes.

2-4

Chapter 2: BIOS Information

2.2.1 EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode, fan profile and boot device priority. To access the Advanced Mode, click Advanced Mode(F7) or press <F7>.
The default screen for entering the BIOS setup program can be changed. Go to the Setup Mode item in the Boot menu.

Displays a quick overview of the system status

Displays the system properties of the selected mode. Click < or > to switch EZ System Tuning modes

Configures system overclocking

Selects the display language of the BIOS setup program

Search(F9)

Displays the CPU Fan's speed. Click the button to manually tune the fans
Loads optimized default settings

Saves the changes and resets the system
Click to go to Advanced mode Search on the FAQ
Click to display boot devices Selects the boot device priority

The boot device options vary depending on the devices you installed to the system.

ASUS Pro WS X570-ACE

25

2.2.2 Advanced Mode
The Advanced Mode provides advanced options for experienced endusers to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations.
To access the EZ Mode, click EzMode(F7) or press <F7>.

Configuration fields Menu bar Language

MyFavorite(F3)

Search(F9) Scroll bar
Qfan Control(F6) EZ Tuning Wizard(F11)

Menu items

General help

Last modified settings

Go back to EZ Mode Hot Keys Search on the FAQ
Displays a quick overview of the system status

26

Chapter 2: BIOS Information

Menu bar The menu bar on top of the screen has the following main items:

My Favorites Main Ai Tweaker Advanced Monitor Boot Tool Exit

For saving the frequentlyused system settings and configuration For changing the basic system configuration For changing the overclocking settings For changing the advanced system settings For displaying the system temperature, power status, and changing the fan settings For changing the system boot configuration For configuring options for special functions For selecting the exit options and loading default settings

Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.
Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. To display the submenu, select the item and press <Enter>.
Language This button above the menu bar contains the languages that you can select for your BIOS. Click this button to select the language that you want to display in your BIOS screen.
My Favorites (F3) This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequently used BIOS settings and save it to MyFavorites menu.
Q-Fan Control (F6) This button above the menu bar displays the current settings of your fans. Use this button to manually tweak the fans to your desired settings.
Search (F9) This button allows you to search for BIOS items by entering its name, enter the item name to find the related item listing.

ASUS Pro WS X570-ACE

27

Search on FAQ Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code:
Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the other items on the screen. General help At the bottom of the menu screen is a brief description of the selected item. Use <F12> key to capture the BIOS screen and save it to the removable storage device. Configuration fields These fields show the values for the menu items. If an item is userconfigurable, you can change the value of the field opposite the item. You cannot select an item that is not userconfigurable. A configurable field is highlighted when selected. To change the value of a field, select it and press <Enter> to display a list of options. Hot keys This button contains the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. Last Modified button This button shows the items that you last modified and saved in BIOS Setup.

2-8

Chapter 2: BIOS Information

2.3 Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select OK to load the default values. Save Changes & Reset Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved. When you select this option or if you press <F10>, a confirmation window appears. Select OK to save changes and exit. Discard Changes and Exit This option allows you to exit the Setup program without saving your changes. When you select this option or if you press <Esc>, a confirmation window appears. Select OK to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available USB devices.

ASUS Pro WS X570-ACE

2-9

210

Chapter 2: BIOS Information

Appendix
Appendix
Notices
FCC Compliance Information
Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. - Consult the dealer or an experienced radio/TV technician for help.

ASUS Pro WS X570-ACE

A-1

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)
Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B)
VCCI: Japan Compliance Statement Class B ITE
KC: Korea Warning Statement

A-2

Appendices

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Regional notice for California
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
GoogleTM License Terms
Copyright© 2019 Google Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

ASUS Pro WS X570-ACE

A-3

English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support
Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l'UE peut être téléchargée à partir du site Internet suivant : www.asus.com/support
Deutsch ASUSTeK Computer Inc. erklärt hiermit, dass dieses Gerät mit den wesentlichen Anforderungen und anderen relevanten Bestimmungen der zugehörigen Richtlinien übereinstimmt. Der gesamte Text der EUKonformitätserklärung ist verfügbar unter: www.asus.com/support
Italiano ASUSTeK Computer Inc. con la presente dichiara che questo dispositivo è conforme ai requisiti essenziali e alle altre disposizioni pertinenti con le direttive correlate. Il testo completo della dichiarazione di conformità UE è disponibile all'indirizzo: www.asus.com/support
  ASUS ,            .  , ,   www.asus.com/support
   ASUSTeK Computer Inc. ,                .            : www.asus.com/support
Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj ureaj sukladan s bitnim zahtjevima i ostalim odgovarajuim odredbama vezanih direktiva. Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support
Cestina Spolecnost ASUSTeK Computer Inc. tímto prohlasuje, ze toto zaízení spluje základní pozadavky a dalsí píslusná ustanovení souvisejících smrnic. Plné znní prohlásení o shod EU je k dispozici na adrese: www.asus.com/support
Dansk ASUSTeK Computer Inc. erklærer hermed, at denne enhed er i overensstemmelse med hovedkravene og andre relevante bestemmelser i de relaterede direktiver. Hele EU-overensstemmelseserklæringen kan findes på: www.asus.com/support
Nederlands ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van de verwante richtlijnen. De volledige tekst van de EU-verklaring van conformiteit is beschikbaar op: www.asus.com/support
Eesti Käesolevaga kinnitab ASUSTeK Computer Inc, et see seade vastab asjakohaste direktiivide oluliste nõuetele ja teistele asjassepuutuvatele sätetele. EL vastavusdeklaratsiooni täielik tekst on saadaval järgmisel aadressil: www.asus.com/support
Suomi ASUSTeK Computer Inc. ilmoittaa täten, että tämä laite on asiaankuuluvien direktiivien olennaisten vaatimusten ja muiden tätä koskevien säädösten mukainen. EU-yhdenmukaisuusilmoituksen koko teksti on luettavissa osoitteessa: www.asus.com/support
   ,  AsusTek Computer Inc.                  .          : www.asus.com/support
Magyar Az ASUSTeK Computer Inc. ezennel kijelenti, hogy ez az eszköz megfelel a kapcsolódó Irányelvek lényeges követelményeinek és egyéb vonatkozó rendelkezéseinek. Az EU megfelelségi nyilatkozat teljes szövege innen letölthet: www.asus.com/support
Latviski ASUSTeK Computer Inc. ar so pazio, ka s ierce atbilst saistto Direktvu btiskajm prasbm un citiem citiem saistosajiem nosacjumiem. Pilns ES atbilstbas paziojuma teksts pieejams seit: www.asus.com/support
Lietuvi ,,ASUSTeK Computer Inc." siuo tvirtina, kad sis renginys atitinka pagrindinius reikalavimus ir kitas svarbias susijusi direktyv nuostatas. Vis ES atitikties deklaracijos tekst galima rasti: www.asus.com/support
Norsk ASUSTeK Computer Inc. erklærer herved at denne enheten er i samsvar med hovedsaklige krav og andre relevante forskrifter i relaterte direktiver. Fullstendig tekst for EU-samsvarserklæringen finnes på: www.asus.com/support
Polski Firma ASUSTeK Computer Inc. niniejszym owiadcza, e urzdzenie to jest zgodne z zasadniczymi wymogami i innymi wlaciwymi postanowieniami powizanych dyrektyw. Pelny tekst deklaracji zgodnoci UE jest dostpny pod adresem: www.asus.com/support
Português A ASUSTeK Computer Inc. declara que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes das Diretivas relacionadas. Texto integral da declaração da UE disponível em: www.asus.com/support

Român ASUSTeK Computer Inc. declar c acest dispozitiv se conformeaz cerinelor eseniale i altor prevederi relevante ale directivelor conexe. Textul complet al declaraiei de conformitate a Uniunii Europene se gsete la: www.asus.com/support
Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj ureaj u saglasnosti sa osnovnim zahtevima i drugim relevantnim odredbama povezanih Direktiva. Pun tekst EU deklaracije o usaglasenosti je dostupan da adresi: www.asus.com/support
Slovensky Spolocnos ASUSTeK Computer Inc. týmto vyhlasuje, ze toto zariadenie vyhovuje základným poziadavkám a ostatým príslusným ustanoveniam príslusných smerníc. Celý text vyhlásenia o zhode pre státy EÚ je dostupný na adrese: www.asus.com/support
Slovenscina ASUSTeK Computer Inc. izjavlja, da je ta naprava skladna z bistvenimi zahtevami in drugimi ustreznimi dolocbami povezanih direktiv. Celotno besedilo EU-izjave o skladnosti je na voljo na spletnem mestu: www.asus.com/support
Español Por la presente, ASUSTeK Computer Inc. declara que este dispositivo cumple los requisitos básicos y otras disposiciones pertinentes de las directivas relacionadas. El texto completo de la declaración de la UE de conformidad está disponible en: www.asus.com/support
Svenska ASUSTeK Computer Inc. förklarar härmed att denna enhet överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i relaterade direktiv. Fulltext av EU-försäkran om överensstämmelse finns på: www.asus.com/support
 ASUSTeK Computer Inc. ,            .        : www.asus.com/support
Türkçe AsusTek Computer Inc., bu aygitin temel gereksinimlerle ve ilikili Yönergelerin dier ilgili koullariyla uyumlu olduunu beyan eder. AB uygunluk bildiriminin tam metni u adreste bulunabilir: www.asus.com/support
Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj ureaj usklaen sa bitnim zahtjevima i ostalim odgovarajuim odredbama vezanih direktiva. Cijeli tekst EU izjave o usklaenosti dostupan je na: www.asus.com/support

A-4

Appendices

ASUS contact information

ASUSTeK COMPUTER INC.

Address

4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan

Telephone

+886-2-2894-3447

Fax

+886-2-2890-7798

Web site

www.asus.com

Technical Support
Telephone Fax Online support

+86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv

ASUS COMPUTER INTERNATIONAL (America)

Address

48720 Kato Rd., Fremont, CA 94538, USA

Telephone

+1-510-739-3777

Fax

+1-510-608-4555

Web site

http://www.asus.com/us/

Technical Support
Support fax Telephone Online support

+1-812-284-0883 +1-812-282-2787 http://qr.asus.com/techserv

ASUS COMPUTER GmbH (Germany and Austria)

Address

Harkort Str. 21-23, 40880 Ratingen, Germany

Fax

+49-2102-959931

Web site

http://www.asus.com/de

Online contact

http://eu-rma.asus.com/sales

Technical Support
Telephone Support Fax Online support

+49-2102-5789555 +49-2102-959911 http://qr.asus.com/techserv

ASUS Pro WS X570-ACE

A-5

A-6

Appendices

Adobe InDesign CS6 (Windows) Adobe PDF Library 10.0.1