Safety Information
To ensure safe operation and service of the
current clamp, follow these instructions:
• Read all operating instructions before use and follow all
safety instructions.
• Use the Current Clamp only as specified in the
operating instructions, otherwise the clamp’s safety
features may not protect you.
• Adhere to local and national safety codes. Individual
protective equipment must be used to prevent shock
and arc blast injury where hazardous live conductors
are exposed.
• Do not hold the Current Clamp anywhere beyond the
tactile barrier. See Features and Connections.
• Before each use, inspect the Current Clamp. Look for
cracks or missing portions of the clamp housing or
output cable insulation. Also look for loose or weakened
components. Pay particular attention to the insulation
surrounding the jaws.
• Never use the clamp on a circuit with voltages higher
than 600 V (CAT. III) or a frequency higher than 400 Hz
(i410) or 2 kHz (i1010).
• CAT III equipment is designed to protect against
transients in equipment in fixed equipment
installations, such as distribution panels, feeders and
short branch circuits, and lighting systems in large
buildings.
• Use extreme caution when working around bare
conductors or bus bars. Contact with the conductor
could result in electric shock.
Use caution when working with voltages above 60 V dc,
•
30 V ac rms or 42 V ac peak. Such voltages pose a
shock hazard.
PN 617677 September 1996, Rev.2, 6/05
1996-2005 Fluke Corporation. All rights reserved. Printed in Thailand.
cts Online at:
AC/DC Current Clamp
XW Read First: Safety Information
GlobalTestSupply
www.
i410/i1010
Instruction Sheet
.com
®
sales@Glob
PN 642733 December, 1996 1996 Fluke Corporation. All rights reserved. Printed in U.S.A. Product names are trademarks of their respective companies.
i410/i1010
AC/DC Current Clamp
Service Information
WWarning
To avoid electric shock:
• Do not service this Current Clamp unless you are qualified to do so.
The service information provided in this document is for use by quali-
fied personnel only.
• Always remove input signals from the Current Clamp before opening
the case.
• Be careful when working with voltages that exceed 30V ac rms, 42.4V
pk, or 60V dc.
• The Current Clamp is protected throughout by double insulation. When
servicing the Current Clamp, use only specified replacement parts.
Caution
• If the Current Clamp is to be Calibrated, you must have a replacement
decal. See the Replacement Parts section for further details.
• This Current Clamp contains parts that can be damaged by static dis-
charge. Follow the standard practices for handling static sensitive de-
vices.
Introduction
Service Information covers the following service-related areas for the i410/i1010 AC/DC Current
Clamps:
• Product specifications
• Required equipment
• Performance test procedure and test values
• Preparing for calibration
• Calibration procedure
• Reassembly procedure
• Replacement parts
Usually, service information in this document applies to both models (i410 and i1010). Information ap-
plicable to only one model is so noted. For operating information, refer to the Instruction Sheet that came
with the Current Clamp.
®
i410/i1010
AC/DC Current Clamp
Instruction Sheet
Safety Information
XW Read First: Safety Information
To ensure safe operation and service of the current clamp, follow these instructions:
•Read all operating instructions before use and follow all safety instructions.
•Use the Current Clamp only as specified in the operating instructions, otherwise the clamp’s safety features may not protect you.
•Adhere to local and national safety codes. Individual protective equipment must be used to prevent shock and arc blast injury where hazardous live conductors are exposed.
•Do not hold the Current Clamp anywhere beyond the tactile barrier. See Features and Connections.
•Before each use, inspect the Current Clamp. Look for cracks or missing portions of the clamp housing or output cable insulation. Also look for loose or weakened components. Pay particular attention to the insulation surrounding the jaws.
•Never use the clamp on a circuit with voltages higher than 600 V (CAT. III) or a frequency higher than 400 Hz (i410) or 2 kHz (i1010).
•CAT III equipment is designed to protect against transients in equipment in fixed equipment installations, such as distribution panels, feeders and short branch circuits, and lighting systems in large buildings.
•Use extreme caution when working around bare conductors or bus bars. Contact with the conductor could result in electric shock.
•Use caution when working with voltages above 60 V dc, 30 V ac rms or 42 V ac peak. Such voltages pose a shock hazard.
PN 617677 September 1996, Rev.2, 6/05
1996-2005 Fluke Corporation. All rights reserved. Printed in Thailand.
Features and Connections
A ZERO
i410 CLAMP METER
600V
76 TRUE RMS MULTIMETER
V
ar001i.eps
A Jaw Lever
B Jaw Centering Marks
C ON Indicator
D ON/OFF Switch
E Zero Adjust
F Battery Access
G Output Cable
H Tactile Barrier
Minimum voltmeter requirements:
•Accepts safetyshrouded banana plugs.
•Can display 1 mV (0.1 mV preferred)
•Accuracy ≥ 0.75 %
•Input impedance ≥ 1 MΩ, ≤100 pF.
Measuring DC Current
Maximum: 400 A dc (i410) or 1000 A dc (i1010)
i410
600V
|
76 TRUE RMS MULTIMETER |
|
|
CAT |
600V |
|
600A |
|
|
mV |
A ZERO
i410 CLAMP METER
600V
ar002i.eps
A Connect to voltmeter.
B Select mV dc.
C Set ON.
D Adjust ZERO (jaws
empty.)
A ZERO
ar006i.eps
E Clamp and center around conductor.
F Read voltmeter (1 mV = 1 A.)
-
Blum?Novotest
TC60
TC60 | TC63-30 Touch probe focus on productivity – Workpiece measurement Radio transmission Multidirectional Wear-free measuring mechanism Modular system Batch- & mass production Contour measurement Axes compensation Operating instructions English Type P03.6000-010 | P03.6300-010 …
TC60 Measuring Instruments, 29
-
Tegam
GEMINI 5540A
GEMINI 5540A Page 1 of 4 5540A-901,Rev. A GEMINI 5540A RF POWER METER QUICK START GUIDE 1. UNPACKING AND INSPECTION Thank you for your purchase of the TEGAM GEMINI 5540A RF Power Meter. This Quick Start Guide will provide the essential information necessary to begin using your new instrument right away. For a ful …
GEMINI 5540A Measuring Instruments, 5
-
VITO
FT 440
2 3 45 7 861FT 440Short instructions91928 2018YEARSCELEBRATING 90 YEARS OF GASTRONOMY EXCELLENCEWORLDASSOCIATION OF CHEFSSOCIETIESVITO AG Tuttlingen, Germany T: +49 7461 962890F: +49 7461 [email protected] — www.vito.agPreparationImportant! For optimum accuracy rest oil for at least 20 minutes before measuring. No fo …
FT 440 Test Equipment, 2
-
Autonics
krn100 series
Universal input card[KRN-UI2]Digital input card[KRN-DI6]Alarm output card[KRN-AR4(relay output)]※Each channel is isolated and dielectric strength is 500V.Alarm output card[KRN-AT6(transistor output)]Transmitter power output card [KRN-24V3]Communication output card [KRN-COM]※AL1,2,3 and AL4,5,6 are isolated.※Each …
krn100 series Measuring Instruments, 2
-
Agilent Technologies
71612
This booklet is intended as a handy reminder of the fundamen-tals of BER measurement and of how to use the Agilent 71612 Error Performance Analyzer for BER measurements.Full details of all the steps and procedures are given in the 71612 Operating and Programming Manual. We recommend that you read the full manual before …
71612 Measuring Instruments, 61
Recommended Documentation:
Мультиметры FLUKE-87V/I410 — инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Вы можете скачать инструкцию к FLUKE-87V/I410 по ссылке ниже, если не хотите ждать загрузки. Если остались вопросы, задайте их в комментариях после инструкции.
«Загружаем инструкцию», означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Полезные видео
Характеристики
Остались вопросы?
Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему
Часто задаваемые вопросы
Как посмотреть инструкцию к FLUKE-87V/I410?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице или скачать кликнув по специальной кнопке.
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как можно распечатать инструкцию?
Скачайте ее по специальной кнопке над формой чтения на ваше устройства и отправьте на печать.