Pz 61dr e пульт управления инструкция

Lossnay Remote Controller

MODEL

PZ-61DR-E

Instruction Book

Prior to use, thoroughly read the instructions in this manual to use the product correctly.

Retain for future reference.

Make sure that this CD-ROM and Installation Manual are passed on to any future users.

To ensure safety and proper operation of the remote controller, the remote controller should

only be installed by qualified personnel.

English

Deutsch

Français

Español

Italiano

Nederlands

Português

Türkçe

Magyar

Polski

Svenska

Hrvatski

Dansk

Lossnay Remote Controller

PZ-61DR-E

Installation Manual

This installation manual describes how to install the Lossnay Remote Controller.

Please be sure to read this installation manual and the files on the CD-ROM that is supplied with the Remote Controller before proceeding

with the installation. Failure to follow the instructions may result in equipment damage.

For information not contained in this booklet, please refer to the files on the CD-ROM that is supplied with the Remote Controller.

If the files are not readable, please contact your dealer.

For information on how to wire and install the Lossnay units, refer to the Lossnay unit Installation Manual.

After the installation, hand over this manual to users.

1. Safety Precautions

Thoroughly read the following safety precautions prior to installation.

Observe these precautions carefully to ensure safety.

WARNING

Indicates a risk of death or serious injury.

CAUTION

Indicates a risk of serious injury or structural damage.

After reading this manual, pass it on to the end user to retain for future reference.

Keep this manual for future reference and refer to it as necessary. This manual should be made available to those who repair or relocate

the controller. Make sure that the manual is passed on to any future users.

General precautions

WARNING

Do not install the unit in a place where large amounts of oil, steam,

organic solvents, or corrosive gases, such as sulfuric gas, are present

or where acidic/alkaline solutions or sprays are used frequently. These

substances can compromise the performance of the unit or cause

certain components of the unit to corrode, which can result in electric

shock, malfunctions, smoke, or fire.

To reduce the risk of shorting, current leakage, electric shock,

malfunctions, smoke, or fire, do not wash the controller with water

or any other liquid.

To reduce the risk of electric shock, malfunctions, smoke or fire, do

not operate the switches/buttons or touch other electrical parts with

wet hands.

CAUTION

To reduce the risk of fire or explosion, do not place flammable

materials or use flammable sprays around the controller.

To reduce the risk of damage to the controller, do not directly spray

insecticide or other flammable sprays on the controller.

To reduce the risk of electric shock or malfunctions, do not touch

the display or buttons with a pointy or sharp object.

All electric work must be performed by qualified personnel.

For distribution to dealers and contractors

To reduce the risk of injury or electric shock, before spraying a

chemical around the controller, stop the operation and cover the

controller.

To reduce the risk of injury or electric shock, stop the operation and

switch off the power supply before cleaning, maintaining, or inspecting

the controller.

Properly install all required covers to keep moisture and dust out of the

controller. Dust accumulation and water can cause electric shock,

smoke, or fire.

To reduce the risk of injury, keep children away while installing,

inspecting, or repairing the controller.

To reduce the risk of injury and electric shock, avoid contact with

sharp edges of certain parts.

To avoid injury from broken glass, do not apply excessive force on the

glass parts.

To reduce the risk of injury, wear protective gear when working on the

controller.

— 1 —

English

1407875HK8701A