Thomson telecom ru21838ge4 a инструкция

Precautions of Use

The quality of communication depends on the location and

environment of the base and the handset. The 21838 must be kept

away from sources of excessive heat (radiators, direct sunlight, etc.)

and protected against vibrations and dust. Never allow your telephone

to come into contact with water or other liquids or with aerosols. To

reduce the risk of interference and optimize reception, take particular

care to keep it away from the immediate vicinity of windows, large

metal objects, reinforced concrete, televisions, music centres, halogen

lamps or heating devices, fluorescent lighting, burglar alarms,

microwave ovens, computers, etc.

To clean the 21838, use a lightly moistened antistatic cloth

Information for DECT product:

TM

The 21838 telephone is compliant with the DECT

* standard. It is

designed to transmit and receive telephone calls and be connected to

the public telephone «Country» network.

*DECT is a trademark registered by ETSI.

Safety

In the event of danger, the mains adapter acts as 230V power

isolating device. It should therefore, as a precaution, be installed

close to the appliance and be easily accessible.

If the mains adapter fails, it must be replaced by an identical model.

If not connected to the mains power or if there is a mains power

failure, installations with cordless handsets will no longer work. You

will then be unable to make or receive calls in the event of an

emergency. This is why we recommend that you also have a

– 1 –

• Page 1
  – 0 –…

• Page 2: Precautions Of Use

  Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21880 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols.
• Page 3
  ! Do not use your telephone to notify a gas leak when you are in the vicinity of the leak. It is recommended that you avoid using this device during electrical storms. ThomsonTelecom hereby declares that the 21880 conforms to the essential requirements and other applicable provisions of European directive 1999/5/CE. WARNING:…

• Page 4: Battery Safety Precautions

  Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide. Keep batteries out of children.

• Page 5: Installation

  Installation Packaging Contents Model: 21880 Solo pack Duo pack* Base stations Handsets Power plugs Telephone line Batteries type AAA, 1.2V, 600mAh Charging station Operating instructions 1+optional 1+optional Please check the contents of the package carefully. If anything is missing or shows signs of transport damage, do NOT put the telephone into service! In such a case, contact either your sales outlet with the purchase receipt.

• Page 6: Connecting The Charging Station

  Only use the connection cable supplied. Phone jack AC power outlet Corded unit rear side view CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit.

• Page 7: Getting Started

  AC power outlet Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the remote charge unit to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.

• Page 8
  If batteries are empty, handset LCD will not has any display and the handset will not response to any key. Handset is then required to put back on Base Station / Charger cradle to charge. Handset cannot be used until handset name and aerial icon appear. If handset does not charged full before use, handset may emit battery low alert tone and battery level indicator shows empty Features…

• Page 9: Menu Structure (Handset)

  Up to 10 hours continuous call time Operation with 2 standard AAA batteries (Ni-MH) Adjustable flash time *DECT = Digital Enhanced Cordless Telecommunications Menu Structure (Handset) CALL LOG PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING LIST ENTRY VIP RING 1-10 EDIT ENTRY DELETE…

• Page 10: Flash Time Setting

  LANGUAGE ENGLISH DEUTSCH FRANCAIS CESKY TURKCE POLSKI Λ Λ HNIKA PYCCK ИЙ БЪЛГ И APCK MAGYAR Corded Base Station Set Up TONE/PULSE Dialing A Tone / Pulse switch is located at the base bottom. Default is Tone dialing Flash Time Setting Flash time 600/300/100ms can be selected by a switch located at the base bottom.

• Page 11: Handset And Base Layouts

  Handset and Base Layouts / ▼ Menu / down key CID key / Asterisk key INT / OK INT / OK key Cancel key Mute key – 10 –…

• Page 12: Handset Lcd Display

  Redial / Pause key /Up key / P /▲ External call key. Memory key Flash key Hash key / lock key Handset LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon ▲…

• Page 13: Key Description

  Key Description Key symbol Usage 1, 2ABC, 3DEF, 4GHI, For digit entry for dialing and memory 5JKL, 6MNO, 7PQRS, 8TUV, 9WXYZ, *, 0,# – 12 –…

• Page 14: Set Time

  VOL/▲ / ▼ Volume control / select AM or PM in Time setting menu Direct memory access For programming phone memory Toggle speakerphone On/Off LNR/PAUSE Last redial number or to enter a pause digit REDIAL ► Retrieve the Redial number list / Browse memory / For selection in MENU Delete a digit in pre-dialing / Delete a record CLEAR…

• Page 15
  Base LED Description There are following LED for corded base. Functions Speakerphone If speakerphone is on, this LED is on. In-Use Light up in conversation. Blink in ringing or after receiving Message Waiting Call in standby mode Base LCD Description This is a two line LCD.

• Page 16: Using The Handset Telephone

  It turns on when there is new Caller ID in the standby. It turns on when the Caller ID record is a new record during CID call log list access It turns on when the Caller ID record is a repeated record during CID call log list access CALL It indicates the number of new call in the CID…

• Page 17: Making Internal Calls

  GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Making Internal Calls IMPORTANT: Internal calls can be made only if more than one handset is registered on the base station. Press [INT/ OK] key during standby mode. Press a digit to specify which handset (1~4) to call to. The other handset will ring with the ‘INT’…

• Page 18: Taking Calls

  Taking Calls When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if subscribed, the telephone number of the caller appears (network depended). If the caller has been stored in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes.

• Page 19: Call Log Operations

  Press key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required. Press key. The number is dialed. Note: How to store entries in the phone book is explained in the Chapter “Phone Book”. Call Log Operations IMPORTANT: To use the “Call Log”…

• Page 20: Muting The Microphone

  Store: Press key, then press “INT/OK” key to start the NAME entry by keypad. Press “INT/OK” key to confirm. Select the ring tone with key. Press “INT/OK” key when finish. Note: 1. The CALL LOG icon and display indicator disappear only after browsing through all the entries.

• Page 21: Holding Calls / Forwarding Calls

  Holding Calls / Forwarding Calls If the telephone is connected to a PABX system, it is possible to put calls on hold and call other extension lines or to forward calls. Press “R” key to put the call on hold and dial the extension number (e.g.

• Page 22: Paging The Handset

  Paging the Handset If a handset has been misplaced, it is possible to call all the handsets. Pressing the page key or any key in the handset can stop the page tone. Entering a Dialling Pause (P) If the telephone is connected to a PABX system, it may be necessary to insert a dialing pause.

• Page 23: List Entries / Edit Entries / Delete Entries

  If a VIP ring is assigned for that entry, a digit ‘#’ will be shown in front of the name during the incoming call or browsing “MEM FULL” appear stand for memory full. Or Store the number from the Pre-dialling mode To store a phone number from the Pre-dialing mode (when a phone number is entered during Standby mode before pressing the TALK key) to the phonebook, first press […

• Page 24: Changing The Ringer Melody (External / Internal)

  Press key to select the required volume (from 0 to 5 levels). Press “INT/OK” key. Note: The ringer volume can be heard at different volumes. If the ringer symbol appears as non dotted line, the ringer volume will be switched to OFF. Changing the Ringer Melody (external / internal) Press…

• Page 25: Saving A Prefix

  Saving a Prefix It is possible to save prefix numbers in the handset. This number is then recalled after pressing and hold “0” key for two seconds. Press key as often as necessary until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Prefix mem’…

• Page 26: Default Settings

  Default Settings If selected, the handset settings which you have changed are returned to their default values. The phone book entries are retained. Press key until the HANDSET menu appears. Press “INT/OK” key. Press key to select the submenu ‘Default’ and press “INT/OK”…

• Page 27: Changing The Pin (Personal Identification Number)

  key is pressed and hold for more than 4 seconds. After selecting “REGISTER”, the handset starts searching for a base station which is available for registration. The “Aerial” icon starts flashing. If a base is found, user will be asked to enter the personal identification number PIN for that base.

• Page 28
  Enter old PIN (0000) and press “INT/OK” key. Enter new PIN (e.g. 1111) and press “INT/OK” key. Enter new PIN again (e.g. 1111) and press “INT/OK” key to confirm.. Note: maximum of 8 digits can be entered. Default Settings Press key until the BASE menu appears and press “INT/OK”…
• Page 29
  Making External Call Normal Dialing Pick up the corded handset and dial the telephone number. Place the corded handset on the hook to terminate the call. Pre-dialing Dial the telephone number (using CLEAR for correction). Pick up the corded handset or press key to seize the line.
• Page 30
  Redial Memory Access Press REDIAL key to access the redial memory. Note: If there is no record in the memory, [EMPTY] will display. Press ◄CID or REDIAL► key to view latest/earlier record. Or press EXIT key to exit. Or press CLEAR key to delete the record. Or press and hold CLEAR key 2 seconds to delete all records.
• Page 31
  Reviewing the Redial memory/ Indirect memory/ CID memory when NUMBER is displayed Press MEM key, LCD show “ENTER NAME”. Enter Name characters.(max. 10) — delete entry by pressing CLEAR key Press SELECT 2 times to confirm Or press EXIT key to exit. Key assignment overview Character Space 1…
• Page 32
  Or press and hold CLEAR key 2 seconds to delete Memory l to 10 (not apply to M1 memory). “ERASE ALL” is shown. Press CLEAR or SELECT key again to confirm List Entry/ Edit Entry/ Delete Entry Press MENU key, press ◄ or ► until PHONE BOOK appears. Then press [SELECT] key.
• Page 33
  Press CID key . Note: If there is no record in the memory, “NO CALL” will display. Press ◄ or ► key to view latest/earlier record. NEW icon ON indicate the record is a new NEW icon Off indicate the record is a old Or press EXIT key to exit Or press CLEAR key to delete the record.
• Page 34
  Teleconference (Cored base station to Handset) After have received an external call, it is possible to include a cordless handset in the conversation (three way conference). press “PAGE” key and press [1 or 2 or 3 or 4], the handset number you want to call.

• Page 35: Changing The Ringer Melody

  Note: If corded base station does not answer, press “INT” key again can stop paging Base station MENU Barring Calls The following options are available for selection for barring calls: Option Description DISABLE All telephone calls are possible. EXTERNAL All external calls are barred. NUMBER Phone number starting with that number will be barred, e.g.

• Page 36: Set Date Format

  If Time format is 12 hour format, AM/PM icon can be selected by pressing key. Press SELECT key when finish. . Set DATE FORMAT Press MENU key, press ◄ or ► key until SETTINGS appears. Then press SELECT key. Press ◄ or ► key to select the submenu DATE FORMAT and press SELECT key.

• Page 37: Technical Specifications

  Press EXIT to exit. Note: The following languages are available ENGLISH; GERMAN; FRENCH; CZECH; TURKISH; POLISH; GREEK; RUSSIAN; BULGARIAN; HUNGARIAN Technical Specifications Handset Operating Time: Approx. 10 hours talk time (average values*) Approx. 100 hours standby AC / DC Adapter: (for VD080040D Base) Input: 230V AC / 50 Hz…

• Page 38: General Product Care

  General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Troubleshooting Guide When you forget base PIN, following the procedure to Reset the units. ALL MEMORY AND SETTING WILL BE LOST.

• Page 39
  No display. The battery has not Charge the battery or been charged. replace them (see Battery Charging) No reactions to The keypad is locked. Press * key longer keystroke. than 2 seconds. The handset is outside No radio connection the base station range. Move closer to the to the base station: base station.
• Page 40
  Environment Used equipment and used handset batteries must be disposed of in compliance with current environmental protection regulations. You should return them to your reseller or dispose of them at an approved recycling centre. Do not attempt to open the batteries, as they contain chemical substance.

Радиотелефон thomson telecom ru21838ge4-a инструкция

※ Download: lesclolafac.darkandlight.ru?dl&keyword=thomson+telecom+ru21838ge3-a+%d0%b8%d0%bd%d1%81%d1%82%d1%80%d1%83%d0%ba%d1%86%d0%b8%d1%8f&source=bandcamp.com

Продолжительность периода преимущественного продления составляет 30 дней после окончания срока регистрации. Thomson telecom model ru 21880ge4 b — база аппарата.

In the Encryption key box, type a Network key of your choice. Strategies There are two strategies you can follow: Allow access to web sites and manually specify which web sites may not be accessed. После запуска двигателя, дождитесь, пока он вставлен в гнездо соответствующего замка до слышимого щелчка, заверните пробку топливного бака и крышка люка оборудована солнцезащитной шторкой открывание и закрывание замка багажника.

Радиотелефон thomson telecom ru21838ge4-a инструкция

Other brands and product names may be trademarks or registered trademarks of their respective holders. Document Information Status: v2. Typographical Conventions Following typographical convention is used throughout this manual: Sample text indicates a hyperlink to a Web site. This Setup and User Guide will show you how to set up your Thomson Gateway and how to connect your computer s to the Internet. If both conventional telephone and DSL service are simultaneously available from the same copper pair, you will need a central splitter or distributed filters for decoupling DSL and telephone signals. Public telephone lines carry voltages that can cause electric shock. Wall mount Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface: Take the wall mount leaflet out of the box. Stick the wall mount leaflet on the place where your want to mount your Thomson Gateway. Do not plug in any cables or connect any devices until you are prompted to do so by the wizard. In case of problems If you encounter problems during this installation please refer to page Starting the wizard To start the wizard:… View Documentation to view the documentation that is available for your Thomson Gateway. This list will be automatically updated if you are connected to the Internet. Connect the power supply. Power LED Name Colour Green Solid on Solid on Orange Solid on… Requirements Javascript must be enabled on your browser. Accessing the Thomson Gateway Web Interface Proceed as follows: Open your web browser. Click this name to change your password or switch to another user. View the current position on the Thomson Gateway Web interface. Select change the display level of the page for example: Overview, Details or Configure Get context-related Help information. This way you can always return to your working configuration in case of problems. At a specific point in the installation, the Setup wizard will inform you that the Thomson Gateway has already been configured: Select No and click Next to continue. Where can I find the SSID? If you did not change the SSID manually, your Thomson Gateway uses the SSID that is printed on the bottom panel label of your Thomson Gateway. Your computer must be configured to obtain an IP address automatically. This is the default setting. Procedure Proceed as follows: Connect one end of the yellow Ethernet cable to one of the yellow Ethernet port s of your Thomson Gateway: Connect the other end of the yellow Ethernet cable to your computer. Procedure Before you can make a phone call over the Internet, you must: Connect your phone to the Thomson Gateway. If you choose to configure your Thomson Gateway manually or you still need to configure the telephony service, you can follow the procedure below. Procedure Proceed as follows: Enable the Telephony Service… Verifying Telephone Connectivity Proceed as follows to verify the voice connection: Make sure the Thomson Gateway is turned on and ready for service. Check whether your phone is properly attached to the Thomson Gateway. The phone numbers are provided by your provider. Procedure Proceed as follows: Browse to the Thomson Gateway web pages. This way you can share your files with everyone that is connected to your network. What do I need? A FAT32 formatted USB storage device. This way, all users connected to your Thomson Gateway will be able to access your USB storage device and make changes to it. The Connect To Server window appears. This can be useful if you want to be able to access your shared content from the Internet. Procedure Proceed as follows: Protect your Thomson Gateway Web Interface login account with a… If you are connected to the Internet, the link to the FTP server is displayed under FTP Server: On the Thomson Gateway network, you can also FTP to the local address 192. Additional configuration As you may know the IP address of your Internet connection changes frequently. On this page, you can make a call or send a message simply by clicking on a link. Accessing the Address Book page? Proceed as follows: Browse to the… Which supplementary services that are available is determined by your service provider. In the Navigation Bar, click Configure. In the Pick a task list, click View Telephony Services. Press Illustration R, 3… Accessing the Telephony Statistics page Proceed as follows: Browse to the Thomson Gateway Web On the Toolbox menu, click Telephony. This means that UPnP-capable devices can join and leave a network without any effort of a network administrator. The Network window appears: Right-click your Thomson Gateway displayed as THOMSON TGXXX and click View device web page. Thomson Gateway Web Interface Windows XP If you computer runs Windows XP:… The Network window appears: Right-click your Thomson Gateway displayed as THOMSON TGXXX. If you are currently: Connected to the Internet, click Disable to disconnect from the Internet. Under Universal Plug and Play: Select the Use UPnP check box, to enable UPnP. The Control Panel window appears. Therefore, it is recommended to add the IGD Discovery and Control client to your system. This means that all your computers share one public IP address, as if only one computer is connected to the outside world. Problem When the Thomson Gateway receives an incoming message, the Thomson Gateway has to decide to which computer he will have to send this message. Your computer will use UPnP to communicate to the Thomson Gateway which services are running on the computer. As soon as the device gets a new IP address, the dynamic DNS server updates its entry to the new IP address. But all together it may discourage some hackers to break into you network. Only clients which use the correct network name SSID and passphrase can connect to your network. Encryption methods During the years a number of encryption types have been developed. The list below gives you an overview of the supported encryption types ordered by security level, you will find the highest level of security at the top of the list: WPA-PSK Encryption:… In the Encryption key box, type a Network key of your choice. If you are using: A 64-bit key: Type 10 hexadecimal characters characters from 0 to 9 and from A to F or 5 alphanumeric characters. In the WPA-PSK Encryption Key box, type a pass phrase also known as Pre-shared key of your choice. The pass phrase must consist of 8 to 63 alphanumeric characters or 64 hexadecimal characters characters from 0 to 9 and from A to F. Every network device carries a unique hexadecimal code MAC address. You can easily change the MAC address of your wireless clients. You can only add your wireless devices to the access control list using the for wireless devices task Search for wireless devices task To add new wireless devices to the access control list: Browse to the Thomson Gateway Web On the Home Network menu, click Devices. The WLAN LED toggles between green and red. The Thomson Gateway unlocks the Access Control List for one minute. Access points broadcast their Network Name SSID to announce themselves to the wireless stations and other access points. Wireless clients will make a list of these access points and show them to the user. The user can then select his wireless client and try to connect to this access point. The Firewall page appears. In the upper-right corner, click Configure. A list with security settings with a brief description is displayed. Select the security level of your choice and click Apply. Strategies There are two strategies you can follow: Allow access to web sites and manually specify which web sites may not be accessed. Block is selected under Action for Unknown Sites and you want to make an exception on an allow rule. Click Redirect in the Action list. Click Redirect in the Action list. If the suggestions do not resolve the problem, look at the support pages on broadband. For Internet connection troubleshooting, refer to the provided Installation and Setup Guide. Topics In this chapter: General Thomson Gateway Troubleshooting… You are using the correct power supply for your Thomson Gateway device. The power requirements for your Thomson Gateway are clearly indicated on the identification label on the bottom of the Thomson Gateway. You are using the correct cable type for your Ethernet equipment, that is UTP CAT5 with RJ-45 connectors. Make sure the Thomson Gateway Association Control List is not locked. You can check this on the web pages. Calling over VoIP If you have problems calling via VoIP, check whether: Your telephone is correctly connected to the Thomson Gateway. Your telephone is working on the PSTN network: Connect your phone directly to PSTN not via the Thomson Gateway. Warning A reset to factory default settings deletes all configuration changes you made. Use a pen or an unfolded paperclip to push the recessed Reset button on the back panel. Push it until the Power LED lights red — this will take about 7 seconds. Release the Reset button.

In the upper-right corner, click Configure. Телефон Thomson Telecom RU21806GE2-A не работает база. Requirements Javascript must be met on your browser. Инструкция по эксплуатации телефона thomson telecom. Ищу схему радиотелефона Thomson Telecom RU21838GE3-A, 3, KOT-1971. Примерно год назад мне попался телефон. Иллюстрированный каталог и портфолио. Make sure the Thomson Gateway Association Control List is not locked. Область поиска: Мануалы Найдено: 0. On this responsible, you can make a call or send a message simply by clicking on a link. Инструкция к електроник кейборд 3738, инструкция к електроник кейборд 3738.